Amana Washer Stuck On Sensing Fill? Solved!

Amana washers are an extremely brilliant, high-quality choice of product for new customers opting for home appliances that are cost-effective yet also efficient and work reliably at home. They make laundry easier and quicker with all the features and facilities that they are equipped with.

However, as customers continue to use them on a constant basis, there is one rising complaint that a lot of them face and that is the issue of ‘Amana washer stuck on sensing fill’ This may block the system from continuing to the next washing cycle, causing the whole process to stop completely.

Our article is written to help you with this exact issue and if you follow this article thoroughly, you will easily be able to solve this problem. All you have to do now is buckle your seat belt and dive into this article for the possible solutions.

The sensing phase is important for the complete washing process but if the Amana washer is stuck on sensing fill, it may not continue its task, thereby failing at its function. Generally, the reason why the Amana washer gets stuck on sensing fill is due to a damaged water inlet valve, poor drive motor and shift actuator, or defective control board. Some quick fixes to this would be resetting the device, replacing the old control board, drive motor, and shift actuator, or installing a new water inlet valve. 

Read our article further below to understand the reasons and the fixes according to different malfunctions.

Why Does The Amana Washer Stuck On Sensing Fill?

Before we solve any problem, it is important to understand the root of the problem, in this case, the reason behind the Amana washer getting stuck on sensing fill. For this, we have to first understand what is the function of the sensing fill mode on your Amana washer. 

The Amana washer system is first testing the lid lock and switch to make sure that the door of the washer is properly locked before the sensing fill starts so that the door does not open during the washing cycle. If the lid fails to lock on its own, then this means that the washer door is not totally closed, hence why the Amana washer remains stuck in the sensing fill stage for a longer interval of time so that the next washing cycle is prevented. 

This means that the sensing fill is important to help calculate the size of the load with a few spins before the water is added to it and accordingly, the water will be added slowly depending on the size of the load for the wash cycle to start.

Now that we have understood the basics of why this issue is occurring, let us move on to understanding the causes in detail as well as learning how to solve the problem using different fixes.

Reasons Why Your Amana Washer Is Stuck On Sensing Fill:

Let us take a brief look at a list of various reasons why your Amana washer is stuck on sensing fill.

1. Faulty water inlet valve
2. Shift actuator not working 
3. The lid switch not working
4. Faulty fill sensor
5. Blocked inlet screen
6. Failure of the water switch
7. Overload of laundry
8. Unclean washer
9. Blockage in the water supply
10. Faulty control board

 Now, it is time to analyze some of the main causes in detail and their fixes.

1. Damaged water inlet valve

The function of this water inlet valve is to release an appropriate amount of water inside the washer drum after the sensing fill phase is over. Sometimes due to dirt, debris, or sand, the path of the water inlet valve may be blocked and the water is unable to pass freely through the inlet. 

This could be why your Amana washer is stuck on sensing fill. Other than this, the valve may also be completely damaged by rust or physical damage. In this case, you might want to get it replaced as soon as possible.

Fix: Install a new water inlet valve

The best solution to a damaged water inlet valve is to replace it entirely as without a working inlet valve, the right amount of water will not be added. To install a new water inlet valve:

1. Reach the inside of the washing machine to locate the water valve. Open the top part and find it at the back of the washer
2. Use a screwdriver to unscrew the screws as it is fixed with screws and surrounded with wires.
3. Remove the damaged water valve, and attach the new one. Make sure that all connections are properly done as before. 

2. Faulty drive motor

The second reason why your Amana washer may be stuck on sensing fill could be due to a faulty drive motor. What this means is that if the drive motor itself is damaged, the washer may not be able to complete the sensing process which means that the wash cycle would not start since the washer drum will not spin.

Fix: Install a new drive motor

Make sure to take a look at the cost of buying a new drive motor as it can be quite pricey. If you think it is not worth it to buy a drive motor, you may proceed by buying a new washer instead.  

3. Faulty shift actuator

The main role of the shift actuator is to help in the transitioning of the sensing phase of the washer into the next wash cycle. Due to mechanical stresses like physical damage or electric issues like short circuits, the shift actuator may get damaged. 

If this shift actuator is faulty, then the wash cycle step will not be reached hence it will be stuck in the sensing fill stage. Usually this could also be because of the optical sensor present in the shift actuator that is mainly for overseeing the shift timing. 

Fix: Install a new shift actuator.

If you think it was an electrical error, use a multimeter to test the working of the shift actuator. If you notice lack of electrical continuity this means there is indeed an electrical fault in the shift actuator. 

If it is a mechanical error, then you may also get to replace the old one with a new, working shift actuator. 

4. Defective control board.

This may be another reason why your Amana washer is stuck on sensing the fill stage. The main role of the control board is to control the processes occurring inside the washer and manage them.  Often due to a lack of command, the sensing phase might not have even started which is why the wash cycle may not be reached. 

Fix: Get your control board replaced!

Instead of removing all the components and studying, the best and quickest option to go for is to get the control board replaced entirely. You may need to get the help of a professional to remove the control board as it is surrounded by a lot of tricky wiring.

Amana washer still stuck on sensing fill?

If you have tried all the above ways to fix this problem, yet there is no change in the issue, it is time to run a diagnostic to find the exact problem. Alternatively, you could also try resetting or power cycling your washer. 

To run a diagnostic on your Amana washer follow these steps:

1. Leave the washer on standby. Make sure the lights are all switched off. 
2. Use the Knob to switch off any LED lighting and bring the Knob back to normal.
3. Now follow the order by turning the dial anticlockwise, then clockwise thrice followed by one anti-clockwise and one more clockwise. 
4. Now wait for the washer to switch to diagnostic mode, once the status LED turn on it also means the diagnostic mode is on.
5. Turn the Knob clockwise once and again press ‘start’ to turn the dial one click clockwise again.
6. The error codes will be displayed as it is in diagnostic mode, to decode the error use the manual to match the error. 

Alternatively, reset your washer:

In case your Amana washer is still stuck on sensing fill, try restarting your washer as it will help to reboot and remove any bugs and lead to your washer escaping from being stuck in the sensing fill stage. If you want to follow certain steps, below is the order:

1. Switch off your Amana washer
2. Unplug it from the main power
3. Press and hold down the start button for 5-10 seconds.
4. Re-attach the plug back into the power outlet and switch it on. 

If Troubleshooting Doesn’t Work:

If you encounter problems that are too challenging to fix with the earlier advice, it’s best to contact a professional appliance technician or the manufacturer’s customer support for extra help and any needed repairs.

By following these troubleshooting steps, you can address the issue of your Amana washer being stuck on “sensing fill” and get your laundry back on track. If you’re unsure about the technical aspects of these fixes, don’t hesitate to seek professional assistance for a seamless resolution. Your Amana washer will be up and running smoothly in no time!

Conclusion:

Above are some of the main reasons why your Amana washer may be getting stuck on sensing fill. We have provided you with the best possible solutions as well as different root causes of the problem so that you can tackle this problem easily, faster, and efficiently in the comfort of your home.

If you continue to have your Amana washer getting. Stuck on sensing fill, it may be time to contact customer service for a more personal diagnosis and support for the professional help you require as all the methods have already been tried. We hope that you have found our article helpful and practical.