Kenmore Dishwasher Not Spraying Water? Easy Fix.

Kenmore dishwashers are a rising home appliance option that is known for being excellent dishwashers as they have unique cleaning features and are equipped with numerous facilities and qualities. Although it is a widely used dishwasher, there are some issues that you may face as a customer. One such problem that causes our customers a lot of frustration is the problem of Kenmore dishwashers not spraying water. If you are constantly facing this issue, follow our detailed guide below so that you can get to the root cause of this problem and solve this in several different ways.

If we are to summarize the reasons behind your Kenmore dishwasher not spraying water, they range from having a faulty pump to clogged filters and pumps. It is also important to remember that the float and water supply are working properly. A quick summary to fix this problem would be to inspect all the electrical and mechanical components involved in the drainage system of the dishwasher and carry out their respective fixes in case you find the culprit.

Read below to understand the reasons and follow the different solutions accordingly.

Why Is Your Kenmore Dishwasher Not Spraying Water?

You might have this question arise first in your mind before you proceed to the different solutions for this problem so we are here to inform you of the basic reasons why your Kenmore dishwasher may not be spraying water. Most of the time, it usually occurs due to poor maintenance of the dishwasher or repeated use over a long period causing wear and tear and ultimately leading to physical damage. 

Let us now move on to see the different reasons and fixes

1. Remove Any Clogged Particles

The first reason why your Kenmore dishwasher is not spraying water can be a clogged arm of the dishwasher. This arm has holes that allow the water to be sprinkled all over the dishes however sometimes, due to dirt and debris built up, the holes may get clogged. Generally, two spray arms need constant cleaning. These are the top and bottom spray arms and it is important to clean them for high performance. 

To fix this, you must ensure that the spray arm is cleaned deeply and properly.  Firstly, let the spray arm soak in vinegar overnight so that any remaining debris or food particle is removed entirely. Once these particles have gone, use a brush to gently rub and pull away any remaining attached particles. 

• Remove the dishwasher’s top rack and place it on a flat surface upside down.
• A locking nut secures the spray arm. Rotate the nut to the left to unlock it.
• Remove the spray arm and wash it under running water. Make sure to eliminate all the debris obstructing the spray nozzles.
• Reinstall the spray arm and secure it by turning the locking nut clockwise.
• Return the top rack inside the dishwasher.

If you want to clean the top spray arm:

1. Detach the top rack of the dishwasher and put it on another flat surface
2. Rotate the locking nut to unlock it
3. Remove the spray arm and rinse it under water to remove any remaining dirt.
4. Replace the spray arm into position and lock the nut clockwise to secure the spray arm. 
5. Reattach the top rack inside the dishwasher. 

Aside from cleaning, make sure that the spray arm is working and intact so that there is no resistance as the arm turns around. In case you find any friction, the spray arm may be faulty or broken, which means you might have to get it replaced.

2. Avoid Overloading 

The second reason why your Kenmore dishwasher may not be spraying water is pretty simple and basic. This issue may be arising purely because your Kenmore dishwasher may be overloaded with numerous dishes. When you place a lot of dishes in the dishwasher, they start to block the spray arm from turning. This means the dishwasher won’t turn hence the spray will not work so your dishes will not be cleaned the right way.

To avoid overloading, remember to only put the maximum amount of quantity allowed for the dishes inside the dishwasher. Ensure there is enough space for the spray arms to turn freely and spray water all over the required area. 

Remove excess dishes and arrange the dishes in an efficient, neat manner so that each of them has equal access to the sprinkled water.

3. Check The Circulation Pump

The main function of the circulation pump is to help the circulation of water inside the dishwasher. The motor is used to pump this water and if this pump fails, it may be why your Kenmore dishwasher is not spraying water.

To fix this, detach the lower rack, then the spray arm and remove the filter to have access to the circulation pump. 

Also, make sure to test the motor pump for its electrical activity by checking the continuity. If it is positive then it means that the pump is working just fine. In case it is negative, you might have to get the pump replaced. 

4. Stuck Chopper Blade

The chopper blade is an important component of the dishwasher which functions by cutting the food particles into smaller particles so that they can be drained out easily during a wash cycle. If the chopper blade gets jammed, the pump will also stop working hence your Kenmore dishwasher will not be spraying water. 

Sometimes this also happens because your chopper blade may also be blocked by food particles. To fix this, examine the chopper blade and clean any clogged particles using a toothbrush. Try rotating it gently to move it past jamming and also remember to be careful as you’ll be dealing with sharp blades. 

5. Clogged Circulation Pump

As we discussed before a clogged circulation pump may be an additional reason why your Kenmore dishwasher is not spraying water.

Sometimes your Kenmore dishwasher may fail to filter out certain food particles or debris which start blocking the circulation pump. This means that the pressure of the water being supplied gets reduced and not enough water is sprayed across the dishes.

To fix this carefully examine the circulation pump for any clogged particles. You may have to get rid of the circulation pump from the dishwasher itself for proper scrubbing. 

6. Low Water Pressure

One reason why your Kenmore dishwasher is still not spraying water may be the water pressure.

To fix this, check your water supply for any signs of low pressure. If this pressure is low, this means that the water spray pressure would be weak as well and so the water isn’t spread effectively over all the dishes.

Additionally, there could be clogged particles at play again which may be blocking the impeller. Sometimes food particles may get stuck in the impeller so it is ⁷ rid of them by cleaning them effectively.

Sometimes though luck is not on your side, and you may notice a short circuit or burn marks. In this case of a burnt circuit, you must replace the inlet valve.

7. Defective Overfill Float Switch

This float switch is essential to prevent the dishwasher from overflowing and preventing leakage of liquid or waste from the dishwasher to the outside.

When the maximum level of water is attained, this switch will further trigger the water inlet valve to close.

In case of a faulty overfill float switch, the water inlet valve will also shut down causing your Kenmore dishwasher to stop spraying water. 

To fix this, 

1. Remove the wires connected to the power supply and locate the flow switch under the float.
2. The next step is to use a multimeter to check for the proper working of the dishwasher’s flow switch.
3. The electrical quality can also be measured by checking the continuity of the dishwasher’s float switch.
4. Use multimeter probes to check for proper readings.

By following these comprehensive troubleshooting steps and recommendations, you can effectively diagnose and address a wide range of issues that may arise with your Kenmore dishwasher when it’s not spraying water, ensuring it continues to operate reliably and efficiently.

If you encounter problems that prove too challenging to fix with the earlier guidance, it’s advisable to reach out to a professional appliance technician or Kenmore’s customer support for additional assistance and any necessary repairs.

Locate Your Kenmore Dishwasher Manual: If you have your Kenmore dishwasher’s model number, visit Kenmore’s official website and enter it in the search bar. Look for the “User Manual” under the “More Information” section. You might discover model-specific troubleshooting steps in the manual. Additionally, some dishwashers include a physical copy of the manual with the appliance.

Contact Kenmore Support: If your Kenmore dishwasher is still experiencing issues after following the troubleshooting steps, it might be best to consider professional repairs. Get in touch with Kenmore’s support team at 800-695-2761. You can also schedule a visit from a certified technician online. In some cases, your warranty may cover the repair costs.

Also Check: Is your Kenmore dishwasher not draining?

Conclusion.

Above is a list of described solutions and reasons why your Kenmore dishwasher is not spraying water. In case you continue to face this issue, you must contact customer service for troubleshooting at a more personal level. Although we are confident that,  by reading our article above you have found your rightful solution.